Acrylic primer suitable for internal or external use.
PRIMER ACRYLCO is a water based, acrylic primer suitable for internal or external use. It effectively reduces the absorbance of the surface to be coated with acrylic paints or insulators.It is very resistant to UV radiation, weather conditions and heat.
Acrylic paint suitable for every kind of porous surface.
ACRYLCO ECO is an 100% acrylic paint for general exterior use. It is suitable for every kind of porous surface such as concrete, plaster, gypsum boards, wallpapers, old coatings etc and it provides great hiding power. It has very good leveling properties and quick drying. It is virtually odorless because it does not contain dangerous substances, such as aromatic hydrocarbons, ammonia, free formaldehyde and heavy metals. It is certified according to the criteria of the European Union Eco labeling Board (EUEB).
Water based wood primer suitable for interior use
PRIMER TECHNORIPOL is a water based wood primer suitable for interior use. It is very workable and provides very good adhesion for the finish coating (TECHNORIPOL).
Ready to use, acrylic based substrate, suitable for both internal and external use
FIXSTABIL is ready to use, acrylic based substrate, suitable for both internal and external use. It is used to reduce the absorption of the surface to be coated thus making it more suitable for recoating with plastic, acrylic paints or insulators.
Water based paint very resistant to weather conditions and to chalking
ACRYLCO is an acrylic, water based paint very resistant to weather conditions and to chalking. It is recommended for exterior and interior use on any kind of surface (concrete, plaster, wallpaper, old paints etc.). It has great cover capability.
Waterproof and very easy to clean acrylic based paint.
SILICON ACRYLCO is an acrylic based paint, modified with silicon. It is waterproof and very easy to clean. It is very suitable for use in high moisture areas and very resistant to weather conditions and UV radiation. It has great hiding power and it is recommended for both interior and exterior use.
Insulating material with crack bridging ability and protection against ice.
TECHNOSTOP is a high-quality insulating material very resistant to weather conditions. It is able to retain its elasticity at very low temperatures (-15 ºC), so it is shows great crack bridging ability and high protection against ice.
Alkyd-based primer, suitable for iron and steel surfaces.
FAST CURE PRIMER is a quick drying, alkyd-based primer, suitable for all iron and steel surfaces. It provides good protection against corrosion.
Alkyd based primer suitable for all iron and steel surfaces.
ANTICORROSIVE is a quick drying, alkyd based primer, suitable for all iron and steel surfaces. It provides good protection against corrosion.
Undercoat for wooden surfaces, provides high adhesion and easy sanding.
WOOD PRIMER is an undercoat for wooden surfaces. It provides high adhesion and easy sanding. It produces an excellent surface for finishing with the final coating (TECHNORIPOL).
High quality substrate for all kind of surfaces, recommended for wood.
UNDERCOAT is a high quality substrate for all kind of surfaces. It is mostly recommended for wood because of its great adhesion to it. It is very workable with sand paperand gives a perfect substrate to be coated with glossy, satin or matte TECHNORIPOL. It provides excellent hiding power and quick drying
Polyurethane based varnish with exceptional resistance to marine environment.
TECHNODUR VARNISH is a two component, polyurethane based varnish. It has exceptional resistance to marine environment and it is durable for many years. It is highly resistant to water, UV radiation, impact and abrasion.
Solvent-based varnish for interior and exterior use.
STONE VARNISH is a solvent-based varnish suitable both for interior and exterior use. Ιt is used to reduce the absorbency of the surface to be coated on. It is highly resistant to water, impact and UV radiation. It is very easy to use and suitable for all stones or pavement plates.
Water proofing material for interior and exterior use.
IMPREGNATING STONE SEALER is a ready to use water proofing material based on silanes mixture. It is suitable both for interior and exterior use providing surfaces with less absorbency. It is suitable for all stones or pavement tiles, protecting them from humidity and stain absorption.
Finish coating resistant to chemical exposure and weather conditions.
EPOCYD 121 is a finish coating coming in two separate containers and consisting of an epoxy based component and a polyamide curing agent. EPOCYD 121 is highly recommended for internal and external protection of surfaces as it is very resistant to chemical exposure and weather conditions. It is also suitable for fresh water and food storage tanks.
Finish coating for internal protection of surfaces.
EPOCYD 141 is a finish coating consisting of an epoxy based component and a polyamide curing agent, which come in two separate container. It is highly recommended for internal protection of surfaces.
Hard and tough coating with resistance to wear and impact.
EPOCYD 151 F is a coating consisting of an epoxy based component and a polyamide curing agent, which come in two separate containers. It provides a hard and tough coating with outstanding resistance to wear and impact. It is suitable as coating for dry food stuff.
Finish coating highly resistant to chemicals.
EPOXY PHENOLIC is a finish coating consisting of two components, an epoxy phenolic base and a polyamine adduct curing agent. It forms a tough and hard coating resistant to abrasion, impact, seawater, jet fuel, diesel oil and lubricating oil. It is also highly resistant to chemicals.
Finish coating for improved resistance to weather conditions.
EPOXY VINYL is a finish coating consisting of an epoxy-polyamide modified with vinyl copolymers for improved resistance to weather conditions, faster drying, higher flexibility and better overcoatability, when compared to a similar straight epoxy polyamide coating.
Polyurethane based coating with resistance to marine environment and high durability.
TECHNODUR is a high-gloss, two component, polyurethane based coating. It has exceptional resistance to marine environment and high durability. It is very resistant to water, UV radiation, impact and abrasion.
Primer for swimming pools made of concrete.
POOL PRIMER 111 is a varnish consisting of two components. It is used as a primer in epoxy systems applied to swimming pools made of concrete.
Finish coating suitable for swimming pool protection.
POOL PAINT 131 is a finish coating consisting of an epoxy based component and a polyamine curing agent, which come in two separate containers. It forms a hard and tough coating resistant to abrasion, impact, seawater, jet fuel, diesel oil and lubricating oil. It is highly resistant to chemicals and organic solvents. It is suitable for swimming pool protection.
Primer used in epoxy systems applied to concrete.
EPOCYD 111 is a varnish consisting of two components. It is used as a primer in epoxy systems applied to concrete.
Self levelling, solvent free epoxy paint for industrial floors.
EPOXY FLOOR PAINT 141 is a self levelling, two component, solvent free epoxy paint. When cured it provides a hard, impermeable and highly adherent film, resistant to water, gasoline, oil, solvents and chemical solutions. It is used for industrial floors, but also for floors in hospitals, warehouses, supermarkets, garages etc.
Epoxy floor more durable than concrete.
TECHNOLEVEL 935 is a self levelling, solventless, two component epoxy floor more durable than concrete. When cured provides a hard, impermeable and highly adherent film which is very resistant to water, gasoline, oil, solvents and chemical solutions. It is suitable for food and pharmaceutical production facilities, chemical plants, garages etc.
Filler suitable for use on wooden boats.
WOOD PUTTY is an alkyd based filler suitable for wooden surfaces. It is very resistant to seawater and thus is recommended for use on wooden boats.
Epoxy filler suitable for marine use.
DECK FILLER 99 is a two component, solventless, epoxy filler. After curing it provides a tough, impermeable film with very good adhesion which is resistant to water, oil , solvents and chemical solutions. It is extremely suitable for marine use.
Primer for antifouling coatings.
TECHNOPRIMOCON is a vinyl resin based primer and is used as tie coat for antifouling coatings.
Rust cleaning agent for steel surfaces.
RUST STABIL is a liquid cleaning agent suitable for stabilization of rusty surfaces. It consists of tannic acids and acrylic copolymer emulsion. It is used on steel surfaces to clean up the rusty parts and prevent corrosion.
One component paint remover.
PAINT STRIPPER is a very corrosive one component paint remover. It is able to remove on steel or wooden surfaces two component paints as well.
Alkyd resin based paint suitable for road bands.
TRAFFIC PAINT is a special alkyd resin based paint suitable for making road bands. Its base works as an excellent binder for the tiny plastic spheres used for this kind of work. It provides excellent adherence, refraction and reflection. It is suitable for working on coal tar or cement.
Alkyd based coating resistant to seawater, recommended for marine use.
ΤECHNOTEX is a modified alkyd based coating, highly glossy and weather resistant. It is used as a finishing coat on metal and other surfaces primed with RED LEAD PRIMER, ANTICORROSIVE or other primers. It is very resistant to seawater and highly recommended for marine use.
Highly glossy and weather resistant alkyd based coating.
TECHNOLAC ENAMEL is an alkyd based coating, highly glossy and weather resistant. It is used as a finishing coat on metal and other surfaces primed with RED LEAD PRIMER, ANTICORROSIVE or other primers. It is highly resistant to seawater and highly recommended for marine use. It can also be used as top coat on wooden surfaces.
Two component epoxy finishing filler
EPOCYD 978 is a solventless, heavy bodied, two component epoxy finishing filler. When cured and hardened it provides a hard, impermeable and highly adherent film.
Self leveling, polyurethane coating system.
PU FLOOR is a two component, solvent free, self leveling, polyurethane coating system. After application cures to a soft and elastic material resistant to various cleaners and mild chemicals. For exterior use it must be coated with a top coat to avoid yellowness.
Final coat with high resistance to UV radiation and marine environment.
TECHNOVINYL is a final coat consisting of polyvinyl chloride and modified acrylic resin. It provides great adhesion and high resistance to UV radiation and marine environment. It is recommended for swimming pools.
Epoxy based paint with excellent resistance to water, chemicals and UV radiation.
POOL PAINT 115 is a three component, epoxy based paint, highly recommended for swimming pool protection due to its excellent resistance to water, chemicals and UV radiation.
Top coat for steel surfaces, operating up to 200 °C.
SILICON ACRYLIC is a weather and heat resistant top coat for steel surfaces, operating up to 200 °C. It is suitable for application over inorganic zinc primer coats. It displays excellent appearance and colour retention in weathering exposure.
High-gloss, polyurethane based coating.
TECHNODUR ACRYLIC is a high-gloss, two component, polyurethane based coating. It is very resistant to impact, abrasion and weather conditions.
Hard and tough coating with outstanding resistance to wear and impact.
EPOCYD 141 HIGH-BUILD is a finish coating consisting of an epoxy based component and a polyamide curing agent, which come in two separate containers. It provides a hard and tough coating with outstanding resistance to wear and impact.
Coating highly resistant to chemicals and organic solvents.
EPOCYD 131 is a finish coating consisting of an epoxy based component and a polyamine curing agent, which come in two separate containers. It forms a hard and tough coating resistant to abrasion, impact, seawater, jet fuel, diesel oil and lubricating oil. It is highly resistant to chemicals and organic solvents.
Highly glossy and weather resistant alkyd based coating.
QUICK DRYING PAINT is an alkyd based coating, highly glossy and weather resistant. It is cured after 5 to 10 minutes. It is used for painting metal objects (e.g gas cylinders) by dipping or spraying with automatic painting machines.
Primer with over 85% metallic zinc.
ZINC ETHYL SILICATE is a two component primer, containing over 85% metallic zinc in dry film after cured. It is applied to steel surfaces after sandblasting them to SA 2½-SA 3 according to Swedish standards. It provides cathodic protection and it is resistant to weather conditions and impact.
Primer for automatic application subsequent to blast cleaning of steel.
EPOXY SHOP PRIMER is a two-component, epoxy-based, shop primer for automatic application subsequent to blast cleaning of steel and for protection during storage, fabrication and construction. It has weld ability with minimal effects on weld integrity and very good compatibility with topcoats.
Primer that provides high adhesion to steel, galvanized steel and aluminium.
TECHNOMASTIC is a high solids, two component, epoxy based primer. It provides high adhesion to steel, galvanized steel and aluminium so it can be applied to these surfaces without priming or sandblasting them. It is highly resistant to weather conditions, chemicals and sea water.
Zinc rich primer for on metal surfaces.
EPOCYD 181 is a zinc rich primer consisting of an epoxy based component and a curing agent, which come in two separate containers. When applied and cured it contains more than 85% of metallic zinc. Important properties of EPOCYD 181 are its flexibility on metal surfaces, its resistance to wear and the cathodic protection it provides.
Primer for epoxy systems applied to concrete.
EPOCYD 111 is a varnish consisting of two components. It is used as a primer in epoxy systems applied to concrete.
Epoxy based primer, containing strong anti-oxidant substances.
EPOCYD 101 is a two component epoxy based primer, containing strong anti-oxidant substances. It is used for priming completely clean metal surfaces to be coated with epoxy or other paints. It has very good resistance to chemicals.
Acrylic-based paint for steel and wooden surfaces.
TECHNORIPOL is a waterborne, acrylic-based paint, suitable for both interior and exterior use. It can be applied on steel and wooden surfaces after coating them with suitable primer. It is highly resistant against yellowing.
Highly glossy and weather resistant coating.
ΤECHNOLAC is an alkyd based coating, highly glossy and weather resistant. It is used as a finishing coat on metal and other surfaces primed with RED LEAD PRIMER, ANTICORROSIVE or other primers. It can also be used as top coat on wooden surfaces.
Vinyl emulsion paint suitable for surfaces of any material, friendly to the environment.
VINYLCO ECO is a vinyl emulsion paint, both for interior and exterior use, based on PVA-VEOVA copolymers. It provides great hiding power and it is suitable for surfaces of any material, provided that they are properly prepared. It is friendly to the user and does not pollute the environment.
Vinyl emulsion paint, both for interior and exterior use.
VINYLCO SUPER OPAL is a vinyl emulsion paint, both for interior and exterior use, based on PVA-VEOVA copolymers. It provides great hiding power and it is suitable for surfaces of any material, provided that they are properly prepared. After four weeks from application the paint withstands washing with soap.
Water based primer, easy to apply, with great hiding power.
PRIMER VINYLCO is a ready to use, water based primer. It is used in order to reduce the absorbency of the surface to be coated with. It is easy to apply, with great hiding power.
Insulating material with great elasticity, ideal for roofs.
TECHNODACH is a high quality insulating material with great elasticity, ideal for roofs. It is very resistant to weather conditions and UV radiation.